GROUND CLAMPS
.
Clamps for bonding Copper Strap to Copper
Strap, Copper Strap to Tower Leg or Mast,
Copper Strap to Ground Rod.

Tip:   Be sure to clean the connection and apply
Anti-Oxidant Grease when using clamps.
Questions?  You can email us at the following address:
PolyPhaser TK-1
Transition Clamp
COPPER STRAP to GALV. TOWER LEG
$9.95
Click Photo for
larger image.
For 5/8" to 1-1/4"
tower leg or mast.
PolyPhaser TK-2
Transition Clamp
COPPER STRAP to GALV. TOWER LEG
$14.95
Click Photo for
larger image.
For 1-1/4" to 2-1/4"
tower leg or mast.
PolyPhaser TK-3
Transition Clamp
COPPER STRAP to GALV. TOWER LEG
$15.95
Click Photo for
larger image.
For 2-1/4" to 3-3/4"
tower leg or mast.
PolyPhaser 58R-112S
Ground Rod Clamp
Copper Strap to 5/8 Ground Rod
$52.50
For connecting copper strap(s) to ground rod.  Accepts strap up to 1.5"
width.  Wider straps require making holes in the strap for the clamp bolts
to pass through.  Overall height of this clamp is 2.5".  Suitable for 5/8" and
3/4" ground rods.
Click Photo for larger image.
Harger GR58FS15
Ground Rod Clamp
Copper Strap to 5/8" Ground Rod
$37.50
For connecting copper strap(s) to ground rod.  Accepts strap up to 2"
width.  Wider straps require making holes in the strap for the clamp bolts
to pass through.  Overall height of this clamp is 3".   Suitable for 5/8" and
3/4" ground rods.
Click Photo for larger image.
Standard Ground Rod Clamp
for 5/8" Ground Rods
2 to 10 awg Wire Size
$2.75
Click Photo for
larger image.
This is your standard "acorn" style
ground rod clamp for WIRE, not
strap.  UL Listed
May vary slightly from photo.
Standard Ground Rod Clamp
for 3/4" Ground Rods
2 to 10 awg Wire Size
$2.95
Click Photo for
larger image.
This is your standard "acorn" style
ground rod clamp for WIRE, not
strap.  UL Listed
May vary slightly from photo.
Heavy-Duty Ground Rod Clamp
for 1/2" to 3/4" Ground Rods
6 to 4/0 awg Wire Size
$16.50
This heavy-duty ground rod clamp
for WIRE, provides more than 2" of
contact area with wire and ground
rod.  UL Listed
Click Photo for
larger image.
Flat Strap Clamp 2.75"
For Connecting Copper Straps
To Copper Straps
$29.95
Accepts strap up to 1.5" width, for inline and right angle intersections.
Intersections at other angles, or wider straps may require some holes to
be made in the strap.  Overall size of this clamp is 2.75" x 2.75".  The
two plates are made of .125" copper.
Click Photo for larger image.
Flat Strap Clamp 4.25"
For Connecting Copper Straps
To Copper Straps
$49.95
Accepts strap up to 2" width, for inline and right angle intersections.
Intersections at other angles, or wider straps may require some holes to
be made in the strap.  Overall size of this clamp is 4.25" x 4.25".  The
two plates are made of .125" copper.
Click Photo for larger image.
Copyright © 2007-2020 Georgia Copper LLC         All Rights Reserved.